installation for window vista

Checklist before installing
Computer to be installed with Windy31 must have more than one LAN Adapter. Computer to be installed with Windy31 must have Internet connection.

Installation
Please check your computer for Virus and Spyware before installation. Some Viruses and Spywares may interfere with automatic installation of Widny31 driver and utility programs
1) Insert Windy31 into USB port of your laptop or desktop PC, and program will automatically run as shown below
2) Once the program is installed, the following screen will appear on the bottom right of the screen, indicating that the USB device is acknowledged and the installation of Windy31 is in progress.
During installation, Windows Security Alert may display “Keep blocking” & “Unblock” pop-up for security reasons, please select the button “unblock”. (If you select “keep blocking”, there will be no network connection.)
3) Please wait until “Windy31 Gateway Manager” window appears, “Windy31 setting in-progress" and "setting complete" windows will be displayed as shown below. This process will take a few minutes as it installs Windy31 Gateway. (Installation time may differ according to computer configuration)
4) In Step 3, After the “Program has been successfully installed“ message, click “OK”. Windy31 has completed the installation.
Connection method may differ according to Wireless LAN device, please refer to Wireless LAN usage method. (For wireless device usage method, please refer to wireless device product manual or please contact the provider.)

Configuring Windy31 Gateway Manager
Screen provided below is Windy31 Gateway Manager Setting.
For more information, Please refer to our website [www.synetusa.com]
① SSID : Name to be used for wireless (Default is Windy31-XX)② Channel : Assign wireless channel, automatically③ Use Mac Address : Assign SSID as MAC address④ Security Setting : Assign wireless security settings (Please refer to the Installation guide for more details)⑤ Wireless LAN connection list : List of wireless device's MAC address connected to Windy31.⑥ Bridge adapter : Allows Internet-connected network card change⑦ Switch to LAN Card Mode : Button to use Windy31 as LAN Adapter (In LAN Adapter mode, Windy31 Gateway functions cannot be used)
Internet access by other users can be controlled in “Access Control” menu of Windy31 Gateway below.
① Disable : Disable Access Policy.② Allow All : All the Mac addresses listed in the table have access to the internet.③ Reject All : All the Mac addresses listed in the table cannot access to the internet.
Software upgrade
Click “Auto Update”, to confirm that you are using the latest software. If you are currently using an old software, the software update will appear.

Configuring Wireless LAN Adapter
How to configure PC setting for using Windy31 as Wireless LAN Adapter
For more information, please refer to website [www.synetusa.com]
Wireless LAN connection
① Select AP as connection mode from AP list② Add to Profile : Add the selected AP to Profile③ Profile : Menu to connect to AP using Added Profile④ Rescan : Scan Wireless AP⑤ Switch to Gateway mode : Switch to Windy31 mode Wireless Router
Wireless LAN connection
① Select AP to connect② Activate : Connect to the selected AP with wireless (Must click “Activate” button for using wireless Service)③ Add : Add the Profile④ Delete : Delete the Profile or disconnect wireless connection⑤ Edit : Modify profile configuration
Specific wireless connection status is shown under "Link Status" tab
For more information, Please refer to our website [www.synetusa.com]