Installation for window XP

Checklist before installing
* Computer to be installed with Windy31 must have more than one LAN Adapter.
* Computer to be installed with Windy31 must have Internet connection.

Installation

Please check your computer for Virus and Spyware, before installation. Some Viruses and Spywares may interfere with automatic installation of Widny31 driver and utility programs

1) Insert Windy31 into USB port of your laptop or desktop PC, and program will automatically run as shown below.

2) Once the program is installed, the following message will appear on the bottom right of the screen, indicating that the USB device is acknowledged and the installation of Windy31 is in progress.

During installation, Windows Security Alert may display “Keep blocking” & “Unblock” pop-up for security reasons, please select the button “unblock”.
(If you select “keep blocking”, there will be no network connection.)

3) Please wait until “Windy31 Gateway Manager” window appears, “Windy31 setting in-progress" and "setting complete" windows will be displayed as shown below. This process will take a few minutes as it installs Windy31 Gateway.
(Installation period may vary according to computer configuration)

4) In Step 3, once the message “Program has been successfully installed“ appears, click “OK”. Windy31 has completed the installation.

Connection method may vary according to Wireless LAN device, please refer to Wireless LAN usage method.
(For wireless device usage method, please refer to wireless device product manual or please contact the provider.)

Configuring Windy31 Gateway Manager
Screen shown below is Windy31 Gateway Manager Setting.
For more information, Please refer to our website [www.synetusa.com]

① SSID : Name to be used in wireless (Default is Windy31-XX)
② Wireless mode : Assign wireless LAN mode (802.11b=11Mbps/802.11g=54Mbps)
③ Use Mac address : Assign SSID as MAC address .
④ Security Settings : Assign wireless security settings
(Please refer to the installation guide for more details)
⑤ Transmission rate : Designate transmission rate.
⑥ Channel : Assign wireless channel, automatically.
⑦ Area (Country code) :Assign channel range used by each country.
⑧ Wireless LAN connection list : List of wireless device's MAC address connected to Windy31.
⑨ Bridge adapter : Allow Internet-connected network card change
⑩ Switch to LAN card mode : Button to use Windy31 as LAN Adapter. (In LAN Adapter mode, Windy31 Gateway functions cannot be used)

Internet access by other users can be controlled in “Access Control” menu of Windy31 Gateway below.

① Disable : Disable Access Policy.

② Allow All : All the Mac addresses access to the internet listed in the table can be accessed to the internet.

③ Reject All : All the Mac addresses listed in the table can not be accessed to the internet.
Software upgrade

Click “Auto Update”, to confirm that you are using the latest software.
If you are currently using an old software, the software update will appear.

Configuring Wireless LAN Adapter

How to configure PC setting for using Windy31 as Wireless LAN Adapter
For more information, please refer to our website [www.windy31.com]

Wireless LAN connection

① Select AP as connection mode from AP list
② Rescan : Scan Wireless AP
③ Connect : Connect to selected AP with wireless
④ Add to Profile : Add the selected AP to Profile
⑤ Switch to Gateway mode : Switch to Windy31 Wireless Router mode

① Select AP to connect
② Add : Add to profile.
③ Delete : Delete Profile or disconnect wireless connection
④ Edit : Modify profile configuration
⑤ Activate : connect to the selected AP with wireless
(Must click “Activate” button for using wireless service)
Specific wireless connection status is shown under "Link Status" tab
For more information, Please refer to our website [www.synetusa.com]

Optional Configuration
Wireless LAN connection in Windows VISTA
To use wireless LAN service, Wireless LAN Adapter must be installed in your computer.

- Wireless LAN connection program (WLAN Autoconfig) is embedded in Windows VISTA.
- If wireless service is not available, wireless LAN cannot be used.
- Please refer to Windows VISTA user manual for further information on wireless LAN Autoconfig.

Please refer to the product manual of Wireless LAN Adapter you have purchased or contact Wireless LAN Adapter manufacturers/sales representatives for installing user's wireless LAN Adapter/application program.

Optional Connection
Wireless LAN connection in Windows XP

To use Wireless LAN Service, Wireless LAN adapter muse be installed at your computer.

- Wireless LAN connection program (Zero Configuration) is embedded in Windows XP, but Windows 98/ME/2000 do not support wireless connection program

- To use wireless LAN service in Windows 98/ME/2000, please use wireless connection program provided by wireless LAN adapter manufacturers

Please refer to the manual of Wireless LAN Adapter that you have purchased and contact your wireless LAN Adapter suppliers or manufacturers regarding installation of wireless LAN adapter in your PC.

Optional Connection

- If encryption function is active in Wireless AP(Windy31-xx), Network key (password) will be asked when connected.

- If connection is established, then the message indicating 'connected' will be displayed on the right-side of SSID.

Wireless network properties in Windows XP may display different configuration screens according to patch versions of Windows OS.

If the error message “Limited or no connectivity” appears, then directly input IP address. (note : go to next page)

Inputting IP Address Manually

In Internet Protocol (TCP/IP) Properties, select ”Use the following IP Address (S)”, then directly input IP address.

- IP Address : IP address used in Windy31, is in between the following IP range 192.168.33.2 to 192.168.33.254.- Subnet Mask : Windy31 uses C-class by default.(255.255.255.0)- Default gateway : Windy31 uses Default gateway.(192.168.33.1)

DNS server for each network
Bellsouth Fast access DSL: Georgia, USA (DNS: 205.152.37.23)
Comcast (pick the nearest!) USA: Comcast (national) Primary (DNS: 68.87.66.196)
ORSC Public Access DNS Name servers: (DNS: 204.57.55.100) Speakeasy (pick any two!)
USA: Washington state and Oregon (DNS: 66.93.87.2)